3D MEASUREMENT CENTER
HANAKOV, spol. s r.o.3D MEASUREMENT CENTER
HANAKOV, spol. s r.o. - Obchodní úsekCMM technology
Quality control is an indispensable part of engineering production, which is why we regularly invest in CMM technology.
We check the accuracy in metalworking in our own air-conditioned 3D measuring center on CNC gantry coordinate-controlled 3D measuring machines as well as with classic measuring devices (calipers, calipers, micrometers, thread calipers, etc.).
Not only prototype parts are inspected during testing (so-called homologation), but also part of the parts from the batch during serial production.
In the production process, we carry out inter-operational control, thanks to which we are able to detect the discrepancy of the part with the drawing in time and thus maintain high work productivity and production quality.
.
.
CMM technology
Quality control is an indispensable part of engineering production, which is why we regularly invest in CMM technology.
We check the accuracy in metalworking in our own air-conditioned 3D measuring center on CNC gantry coordinate-controlled 3D measuring machines as well as with classic measuring devices (calipers, calipers, micrometers, thread calipers, etc.).
Not only prototype parts are inspected during testing (so-called homologation), but also part of the parts from the batch during serial production.
In the production process, we carry out inter-operational control, thanks to which we are able to detect the discrepancy of the part with the drawing in time and thus maintain high work productivity and production quality.
.
We perform 3D measurements on
3D CMM LK INTEGRA 15.10.8
- for parts with dimensions of 1500 x 1000 x 800 mm (axes X x Y x Z )
- load capacity approx. 1,720 kg
3D CMM Nikon LK V 20.15.15
- for parts with dimensions of 2000 x 1500 x 1500 mm (axes X x Y x Z )
- load capacity approx. 1,981 kg
.
We perform 3D measurements on
3D CMM LK INTEGRA 15.10.8
- for parts with dimensions of 1500 x 1000 x 800 mm (axes X x Y x Z )
- load capacity approx. 1,720 kg
3D CMM Nikon LK V 20.15.15
- for parts with dimensions of 2000 x 1500 x 1500 mm (axes X x Y x Z )
- load capacity approx. 1,981 kg
Description
Machines equipped with CAMIO software. Formed by a bridge and a movable pinole, when the bridge moves along the granite table top. The X and Y axes are driven and controlled by DC motors with friction gears and control rods. The Y-axis is driven by a steel belt. The Y and Z axis movement systems are made of ceramic hollow profiles.
The machines are equipped with a Renishaw ruler with a resolution of 0.5 μ, which guarantees accurate determination of the X, Y and Z coordinates of the touch with an accuracy of ± 2 °C. All drives are made up of a system of precision air bearings that float above the surface.
.
.
Description
Machines equipped with CAMIO software. Formed by a bridge and a movable pinole, when the bridge moves along the granite table top. The X and Y axes are driven and controlled by DC motors with friction gears and control rods. The Y-axis is driven by a steel belt. The Y and Z axis movement systems are made of ceramic hollow profiles.
The machines are equipped with a Renishaw ruler with a resolution of 0.5 μ, which guarantees accurate determination of the X, Y and Z coordinates of the touch with an accuracy of ± 2 °C. All drives are made up of a system of precision air bearings that float above the surface.
.
Tool inspection
The vertical device ZOLLER VENTURION 600/PILOT 3.0 is used to measure and adjust tools for CNC production outside the machine tool. The essence of the device is to repeatedly prepare the tool in such a way that the greatest possible accuracy is achieved and the manufactured part exhibits the required parameters of tolerances after machining according to the drawing or customer requirements.
The device is equipped with HEIDENHAIN system, BOSCH tire, THK guide, SONY camera and UHING drives.
All technical data can be found in our catalog.
.
Tool inspection
The vertical device ZOLLER VENTURION 600/PILOT 3.0 is used to measure and adjust tools for CNC production outside the machine tool. The essence of the device is to repeatedly prepare the tool in such a way that the greatest possible accuracy is achieved and the manufactured part exhibits the required parameters of tolerances after machining according to the drawing or customer requirements.
The device is equipped with HEIDENHAIN system, BOSCH tire, THK guide, SONY camera and UHING drives.
All technical data can be found in our catalog.
